power plus dc series ? r a t i ngs f r o m 10 a to 100 a @ 60 vdc ? led status indicator ? relays are easily paralleled for higher-current applications ? ul approved, ce compliant to en60950-1 ? improved sems screw and washer ? redesigned housing with anti-rotation barriers for generation 3 datasheet click here ? mosfet output ? dc control ? emc compliant to level 3 ? epoxy free design ? optional ip20 cover ? pwm to 1k hz product selection control voltage 10 a 20 a 40 a 60 a 80 a 100 a 4-32 vdc dc60d10 dc60d20 dc60d40 dc60d60 dc60d80 dc60d100 available options not all part number combinations are available. contact crydom technical support for information on the availability of a specific part number. * required for valid part number for options only and not required for valid part number series operating voltage 60: 1-60 vdc thermal pad blank: not included h: included control voltage d: 4-32 vdc cover blank: not included (ip00) c: included (ip20) r a t e d loa d curr e n t 10: 10 amps 20: 20 amps 40: 40 amps 60: 60 amps 80: 80 amps dc d 60 h c 40 t e r m i n a t i o n b lan k : s c r ews & cla m p s k : i n s t alle d stan d o ffs with (1) scr ews for p c b o ard mou n t ing ( i p 00 on ly) k 100: 100 a m p s output specifications (2) description 100 a 60 a 20 a recommended operating voltage [vdc] 1-48 1-48 1-48 absolute maximing rating [vdc] 60 60 60 maximum off-state leakage current @ rated voltage [ma] 0.1 0.1 0.1 maximum load current [adc] (1)(3) 20 60 100 minimum load current [ma] (4) 2.5 2.5 2.5 maximum surge current (10msec) [adc] 108 200 326 maximum on-state voltage drop @ rated current [vdc] 0.30 0.51 0.56 maximum on-state resistance [rds-on] [m ] 15 8.5 5.6 thermal resistance junction to case (rjc) [c/w] 1.6 0.74 0.51 minimum heat sink for rated current @ 40c [c/w] 5 1 0.5 80 a 40 a 10 a 1-48 1-48 1-48 60 60 60 0.1 0.1 0.1 10 40 80 2.5 2.5 2.5 78 163 258 0.17 0.36 0.46 17 9 5.8 1.6 0.74 0.51 5 2 0.5 maximum pulse width modulation frequency [hz] (5) 1000 900 700 1000 900 700 input specifications (2) description dc control control voltage range 4-32 vdc maximum reverse voltage -32 vdc minimum turn-on voltage (6) 4 vdc must turn-off voltage 1 vdc minimum input current (for on-state) 11 ma maximum input current 14 ma nominal input impedance current regulated maximum turn-on time [sec] 75 maximum turn-off time [sec] 150 do not forget to visit us at: www.crydom.com copyright ? 2016 crydom inc. specifications subject to change without notice. datasheet panel mount
? r a t i ngs f r o m 10 a to 100 a @ 60 vdc ? led status indicator ? relays are easily paralleled for higher-current applications ? ul approved, ce compliant to en60950-1 ? improved sems screw and washer ? redesigned housing with anti-rotation barriers for generation 3 datasheet click here general specifications (2) parameters description dielectric strength, input/output/base (50/60hz) 3750 vrms minimum insulation resistance (@ 500 vdc) 10 9 ohms maximum capacitance, input/output 8 pf ambient operating temperature range (7) -40 to 100 c ambient storage temperature range -40 to 125 c weight (typical) 2.53 oz (72 g) housing material ul94 v-0 hardware finish nickel plating baseplate material aluminum input terminal screw torque range (in-lb/nm) 13-15 /1.5-1.7 load terminal screw torque range (in-lb/nm) 18-20 / 2-2.2 input/load terminal screw torque range (in-lb/nm) (1) w/?k? option 8-10 / 0.9-1.13 ssr mounting screw torque range (in-lb/nm) 18-20 / 2-2.2 led input status indicator green humidity per iec60068-2-78 93% non-condensing mtbf (mean time between failures) at 40c ambient temperature (8) 21,395,130 hours (2,441 years) mtbf (mean time between failures) at 60c ambient temperature (8) 11,545,504 hours (1,317 years) recommended wire sizes terminals wire size (solid / stranded) wire pull-out strength (lb)[n] input output 24 awg (0.2 mm 2 ) / 0.2 [minimum] 2 x 12 awg (3.3 mm 2 ) / 3.3 [maximum] 20 awg (0.5 mm 2 ) / 0.518 [minimum] 2 x 10 awg (5.3 mm 2 ) / 5.3 2 x 8 awg (8.4 mm 2 ) / 8.4 [maximum] 10 [44.5] 90 [400] 30 [133] 110 [490] 90 [400] wiring diagram 1 4 +2 +3 s oli d s t a t e r ela y output input load + - v + - v + 1 4 +2 +3 s oli d s t a t e r ela y output input - + v + - v load + * inductive loads must be diode suppresed. * * equivalent circuit block diagrams 0 2 4 6 8 10 12 14 0 5 10 15 20 25 30 35 input current vs input voltage standard regulated dc input input current (ma) dc input voltage -dc + dc -dc trigger circuit control circuit +dc 4 3 1 2 4 3 1 2 current limiter input output do not forget to visit us at: www.crydom.com copyright ? 2016 crydom inc. specifications subject to change without notice. datasheet panel mount input/output terminal screw thread size #6-32 unc / #8-32 unc
me chanical s p e c ifications (2) (1) tolerances: 0.02 in / 0.5 mm all dimensions are in: inches [millimeters] screw termination 1 output + 2 s oli d s t a t e r ela y 4 input + 3 1.1 [27.9] 0.49 [12.4] mounting hole/slot 0.19 [4.9] dia. 0.89 [22.6] 1.88 [47.6] 1.7 [43.2] 2.25 [57.3] 1.0 [25.4] 1.75 [44.5] 1.0 [25.4] 1.75 [44.5] hex standoff termination (?k? option) 1 output + 2 s oli d s t a t e r ela y 4 input + 3 1.1 [27.9] 0.49 [12.4] mounting hole/slot 0.19 [4.9] dia. 1.88 [47.6] 1.7 [43.2] 2.25 [57.3] 1.0 [25.4] 1.75 [44.5] 1.04 [26.4] (4 places) 0.93 [23.6] 1.0 [25.4] (2 places) (2 places) mounting hole/slot 0.19 [4.9] dia. 2.25 [57.3] 1.1 [27.9] 0.49 [12.4] 1.88 [47.6] 1.7 [43.2] 2.32 [58.8] 1.0 [25.4] 1.75 [44.5] 1.0 [25.4] 1.75 [44.5] 1.22 [30.9] screw termination, ip20 do not forget to visit us at: www.crydom.com copyright ? 2016 crydom inc. specifications subject to change without notice. datasheet panel mount general notes general notes (1) option ?k? is designed and tested for use with printed circuit boards or ring/fork terminals having a thickness between 0.031 and 0.093 inches (0.79 to 2.36 mm), and loads rated up to 50 amps. for higher load currents, the ?k? standoff temperature must not exceed 105c. for additional application assistance please contact crydom technical support. (2) all parameters at tc=25c unless otherwise speci?ed. (3) heat sinking required, see derating curves. (4) low current loads and high ambient temperature can affect turn-on time. (5) 8vdc minimum control voltage. resistive loads only. consider switching losses; at maximum frequency reduce to 75% output current. (6) increase minimum voltage by 1v for operations from -20 to -40c. (7) decrease maximum control voltage 1.35v/c above 80c ambient temperature. (8) all parameters at 50% power rating and 100% duty cycle (contact crydom tech support for detailed report). for additional information or speci?c questions, contact crydom technical support.
surge current information 0 25 50 75 10 0 0.1 1 10 10 0 10 00 surge current ( a mp) surge duration ( msec) dc60d10 0 25 50 75 10 0 12 5 15 0 0.1 1 10 10 0 10 00 surge current ( a mp) surge duration ( msec) dc60d20 0 50 10 0 15 0 20 0 25 0 30 0 0.1 1 10 10 0 10 00 surge current ( a mp) surge duration ( msec) dc60d60 0 25 50 75 10 0 12 5 15 0 17 5 20 0 22 5 0.1 1 10 10 0 10 00 surge current ( a mp) surge duration ( msec) dc60d40 0 50 10 0 15 0 20 0 25 0 30 0 35 0 0.1 1 10 10 0 10 00 surge current ( a mp) surge duration ( msec) dc60d80 0 50 10 0 15 0 20 0 25 0 30 0 35 0 40 0 45 0 50 0 0.1 1 10 10 0 10 00 surge current ( a mp) surge duration ( msec) dc60d100 d uty f actor 1 0 % d uty f actor 2 0 % d uty f actor 5 0 % p eriod p ulse width for pulse width modulation applications select the curve according duty factor and pulse duration as following. (i) for single surge pulse tc=40c ;tj 175c (ii) for repetitive surge pulse tc=40c ;tj 130c duty factor = pulse width period x100 (%) single pulse (i) duty factor (10%) (ii) duty factor (20%) (ii) duty factor (50%) (ii) do not forget to visit us at: www.crydom.com copyright ? 2016 crydom inc. specifications subject to change without notice. datasheet panel mount
thermal derate information (iii) ssr metal base plate acting as heat sink, it must be exposed to free ambient air. 0 2 4 6 8 1 0 2 0 3 0 4 0 5 0 6 0 7 0 8 0 9 0 1 0 0 5c/w no heat sink (iii) dc60d10 l o a d cu r r e n t (a m p s) a m b ie n t t e m p e r a t u r e c 0 5 1 0 1 5 2 0 2 0 3 0 4 0 5 0 6 0 7 0 8 0 9 0 1 0 0 5c/w no heat sink (iii) dc60d20 l o a d cu r r e n t (a m p s) a m b ie n t t e m p e r a t u r e c 0 1 0 2 0 3 0 4 0 2 0 3 0 4 0 5 0 6 0 7 0 8 0 9 0 1 0 0 2c/w 3c/w 5c/w dc60d40 l o a d cu r r e n t (a m p s) a m b ie n t t e m p e r a t u r e c 0 2 0 4 0 6 0 l o a d cu r r e n t (a m p s) a m b ie n t t e m p e r a t u r e c 2 0 3 0 4 0 5 0 6 0 7 0 8 0 9 0 1 0 0 1c/w 2c/w 5c/w d c60d60 0 2 0 4 0 6 0 8 0 l o a d cu r r e n t (a m p s) a m b ie n t t e m p e r a t u r e c 2 0 3 0 4 0 5 0 6 0 7 0 8 0 9 0 1 0 0 0.5c/w 1.5c/w 3c/w 5c/w d c60d80 0 20 40 60 80 100 20 30 40 50 60 70 80 90 100 dc60d100 0.5c/w 1.5c/w 3c/w 5c/w load current (amps) ambient temperature (oc) do not forget to visit us at: www.crydom.com copyright ? 2016 crydom inc. specifications subject to change without notice. datasheet panel mount
agency ap provals en60950-1: meets the requirements of sections1.5: 1,7: 2.9: 2.10.5.3: 4.2: 4.5: 4.7: iec 61000-4-2 electrostatic discharge level 3 iec 61000-4-4 electrically fast transients level 3 iec 61000-4-5 electrical surges level 3 e116950 part number: ks101 clear plastic cover compatible with all new s1 designs. safety covers provide added protection from electric shock when installing or checking equipment. protective cover hardware kit part number: hk4 bag with 2 square brass accessories and 2 screw 8-32 x 5/8 for output. used to mount tmr1 lug terminals. new accessories! protective cover & hardware kits recommended accessories cover hardware kit heat sink part no. thermal resistance [oc/w] lug terminal thermal pad ks101 hk1 hk4 hs501dr hs301 / hs301dr hs251 hs201 / hs201dr hs202 / hs202dr hs172 hs151 / hs151dr hs122 / hs122dr hs103 / hs103dr hs101 hs073 hs072 hs053 hs033 hs023 5.0 3.0 2.5 2.0 2.0 1.7 1.5 1.2 1.0 1.0 0.7 0.7 0.5 0.36 0.25 trm1 trm6 hsp-1 hsp-2 acc e s o r i e s rev. 051216 do not forget to visit us at: www.crydom.com copyright ? 2016 crydom inc. specifications subject to change without notice. datasheet panel mount agency approvals
danger / peligro / danger /gefahr / pericolo / h a z a r d o f e l e ct ric s ho ck, e x p l o s io n, o r a r c flash. ? di s c o n n e c t a l l p o w e r b e f o r e i n s ta l l i n g o r wo r k i n g w i t h th i s equipment. ? v e r i f y a l l c o n n e c ti o n s a n d r e p l a c e a l l c o v e r s b e f o r e tu r n i n g o n p o w e r . f a ilu r e t o f o llo w t h e s e in s t r u c t io n s w ill r e s u lt in d e a t h o r s e r io u s in ju r y . rie s g o de de s c a rg a e l e ct ric a o e x p l o s io n. ? de s c o n e c ta r to d o s l o s s u m i n i s tr o s d e e n e r g i a a e s te e q u i p o a n t e s d e tr a b a j a r c o n e s te equipo. ? v e r i f i c a r to d a s l a s conexiones y colocar todas l a s ta p a s antes d e energizer el e q u i p o . e l in c u m p lim ie n t o d e e s t a s in s t r u c c io n e s p u e d e p r o v o c a r la m u e r t e o le s io n e s s e r ia s . ris q u e de de s ch a rg e e l e ct riq ue o u explosion ? e te i n d r e to u te s l e s s o u r c e s d ' n e r g i e d e c e t a p p a r e i l a v a n t d e tr a v a i l l e r d e s s u s d e c e t a p p a r e i l ? vrifier tous connections, et remettre tous couverts en olace avant de mettre sous de n o n-s u iv i d e c e s in s t r u c t io n s p r o v o q u e r a la m o r t o u d e s l s io n s srieuses s r i e u s e s. g e f a hr e in e s e l e kt ris ch e n s chl a g e s o de r e ine r e x p l o s io n. ? s te l l e n s i e j e g l i c h e n s tr o m a b , d e r d i e s e s g e r ? t v e r s o r g t, bevor s i e a n dem g e r ? t arbeiten d u r c h f h r e n ? v o r d e m dr e h e n a u f e n e r g i e a l l e a n s c h l s s e b e r p r f e n u n d a l l e a b d e c k u n g e n e r s e t z e n. un t e r la s s u n g d ie s e r a n w e i s u n g e n k ? n n e n z u m t o d e o d e r z u s c h w e r e n v e r le t z u n g e n f h r e n. ris chio di s co s s a e l e t t ric a o de l l ?e s p l o s ione. ? s p e n g a tu tt a l ' a l i m e n ta z i o ne c h e f o r n i s c e q u e s ta a p p a r e c c h i a t ura p r i m a d i lavorare a questa a p p a r e c c h i a t ura ? v e r i f i c a r e t u tti i c o l l e g a m e n ti e s o s ti tu i r e tu tte l e coperture p r i m a d e l l ?accensione l ' o m is s io n e d i q u e s t e istruzioni p r o v o c h e r l a m o r t e o le s io n i s e r i e ? ? ? ? ? ?? ??? ? ??? ? warning / avertissement / warnung /advertencia / avvertenza / risk of material damage and hot enclosure ? the product's side panels may be hot, allow the product to cool before touching. ? follow proper mounting instructions including torque values. ? do not allow liquids or foreign objects to enter this product. failure to follow these instructions can result in serious injury, or equipment damage. risque de dommage materiel et de surchauffe du boitier ? les panneaux latraux du produit peuvent tre chauds. laisser le produit refroidir avant de le toucher. ? respecter les consignes de montage, et notamment les couples de serrage. ? ne pas laisser pntrer de liquide ni de corps trangers l'intrieur du produit. le non-respect de cette directive peut entra?ner, des lsions corporelles graves ou des dommages matriels. die nichtbeachtung dieser anweisung kann k?rperverletzung oder materialsch?den zur folge haben. gefahr von materialsch?den und geh?useerhitzung ? die seitenw?nde k?nnen hei? sein. lassen sie das produkt abkhlen, bevor sie es berhren. ? beachten sie die montageanweisungen, ? fhren sie keine flssigkeiten oder fremdk?rper in das produkt ein. si no se respetan estas precauciones pueden producirse graves lesiones, da?os materiales. riesgo de da?os materiales y de sobrecalentamiento de la unidad ? los paneles laterales del producto pueden estar calientes. esperar que el producto se enfre antes de tocarlo. ? respetar las instrucciones de montaje, y en particular los pares de apretado. ? no dejar que penetren lquidos o cuerpos extra?os en el producto. la mancata osservanza di questa precauzione pu causare gravi rischi per l'incolumit personale o danni alle apparecchiature. rischio di danni materiali e d'involucro caldo ? i pannelli laterali dell'apparecchio poss ono scottare; lasciar quindi raffreddare il prodotto prima di toccarlo. ? seguire le istruzioni di montaggio corrette. ? non far entrare liquidi o oggetti estranei in questo apparecchio. ??? ??? ???? ? ?????? ? ? ?????? ? ??? do not forget to visit us at: www.crydom.com copyright ? 2016 crydom inc. specifications subject to change without notice. datasheet panel mount
annex - e n v i romental information the environmental information disclosed in this annex including the eip pollution logo are in compliance w i th people?s republic of china electronic industr y standard sj/t11364 ? 2006, marking for c ontrol of pollution caused by electronic information products. part name toxic or hazardous substance and elements lead mercury cadmium hexavalent polybrominated polybrominated (pb) (hg) (cd) chromium (cr (vi)) biphenyls (pbb) diphenyl ethers (pbde) semiconductor die solder - ? ?????????????? sj/t11364 - 2006, ?????? ??? ? ? (pb) (hg) (cd) (cr (vi)) (pbb) (pbde) ?? ? 50 do not forget to visit us at: www.crydom.com copyright ? 2016 crydom inc. specifications subject to change without notice. datasheet panel mount
|
